Wire less communication setting, Unpair the scanner from host, Pair scanner with host – TaoTronics TT-BS009 User Manual

Page 35: Clear the buffer of scanner

Text mode
Original mode

Wire Less Communication Setting

Unpair the scanner from host

Unpair the scanner from host

Pair Scanner with Host

Pairing is the process by which a scanner initiates communication with a
host. The scanner with the Host pairing as follows:
1. Connect the scanner to the Host with the Charging Cable.
2. Press the "Pairing Button” until the Scanner issued a "beep beep" sound.

NOTE: A host is able to work with as more as 99 scanners at the same

time.

Clear the Buffer of Scanner

Scan the setting bar code below will clear the bar code data save in the

scanner buffer.

Clear the Buffer of Scanner