Talos Security BX700WICR - Manual (Page 3)

This installation should be made by a qualified service person and
should conform to all local codes.
The lightning flash with an arrowhead symbol, within an equilateral triangle is
intended to alert the user to the presence of uninsulated “dangerous voltage”
within the product's enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user
to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
INFORMATION - This equipment has been tested and found to comply with limits
for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio
communications.
Operation of this equipment in a residential area is likely to cause harmful
ce in which case the user will be required to correct the interference at his own
expense.
WARNING : Changes or modifications not expressly approved by the manufacturer
could void the user’s authority to operate the equipment.
WARNING : To prevent electric shock and risk of fire hazards:
Do NOT use power sources other than that specified.
Do NOT expose this appliance to rain or moisture.
This installation should be made by a qualified service person and
should conform to all local codes.
The lightning flash with an arrowhead symbol, within an equilateral triangle is
intended to alert the user to the presence of uninsulated “dangerous voltage”
within the product's enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user
to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
INFORMATION - This equipment has been tested and found to comply with limits
for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio
communications.
Operation of this equipment in a residential area is likely to cause harmful
ce in which case the user will be required to correct the interference at his own
expense.
WARNING : Changes or modifications not expressly approved by the manufacturer
could void the user’s authority to operate the equipment.
WARNING : To prevent electric shock and risk of fire hazards:
Do NOT use power sources other than that specified.
Do NOT expose this appliance to rain or moisture.
18
18
Specifications
PAL NTSC
1/3" SONY II CCD
Color - 600TV lines / B&W - 700TV lines
) V ( 2 8 5 x ) H ( 3 5 7 ) V ( 4 9 4 x ) H ( 8 6 7
2:1 Interlace
Internal
0.12Lux(15IRE:Sense-up OFF) F1.2 / 0.0002Lux(15IRE:Sense-up ON) F1.2
52 dB Min (AGC Off)
1Vp-p Composite 75ȍ
15.734KHz(H)/ 59.94HZ (V) 15.625KHz (H) / 50Hz (V)
1/50 ~ 1/100,000sec 1/60 ~ 1/100,000sec
LOW / MIDDLE / HIGH / OFF
C/CS Mount(changeable)
DC12V(±10%) / AC24V(±10%) Dual Power regulated
180mA Max.
-10°C ~ +50°C
30% ~ 90% RH
Weight(g) 340g
61(W) x 51(H) x 116 (D)
Lens Mount
0 ~ 49 Sharpness
Power Source
Scanning Frequency
Power Consumption
Operating Temperature
Electronic Shutter Speed
Operating Humidity
Dimensions (mm)
Scanning System
Synchronization
S/N ratio
Horizontal Resolution
Min.lllumination
SPECIFICATION
Video Output
CCD
Effective Pixels
ON/OFF(OFF / LOW / MIDDLE / HIGH)
OFF ~ x512
3D-DNR
Sens-up
AGC
ON / OFF Motion Detection
ON / OFF(WDR LEVEL, WEIGHT) WDR
COLOR / BW / AUTO / EXT Day & Night
8Windows(Polygonal, 8Colors) Privacy Masking
ON / OFF BLC
ATW / ACW / MANUAL / PUSH White Balance
ON / OFF / V-FLIP, ROTATE Mirror
PAL NTSC
1/3" SONY II CCD
Color - 600TV lines / B&W - 700TV lines
) V ( 2 8 5 x ) H ( 3 5 7 ) V ( 4 9 4 x ) H ( 8 6 7
2:1 Interlace
Internal
0.12Lux(15IRE:Sense-up OFF) F1.2 / 0.0002Lux(15IRE:Sense-up ON) F1.2
52 dB Min (AGC Off)
1Vp-p Composite 75ȍ
15.734KHz(H)/ 59.94HZ (V) 15.625KHz (H) / 50Hz (V)
1/50 ~ 1/100,000sec 1/60 ~ 1/100,000sec
LOW / MIDDLE / HIGH / OFF
C/CS Mount(changeable)
DC12V(±10%) / AC24V(±10%) Dual Power regulated
180mA Max.
-10°C ~ +50°C
30% ~ 90% RH
Weight(g) 340g
61(W) x 51(H) x 116 (D)
Lens Mount
0 ~ 49 Sharpness
Power Source
Scanning Frequency
Power Consumption
Operating Temperature
Electronic Shutter Speed
Operating Humidity
Dimensions (mm)
Scanning System
Synchronization
S/N ratio
Horizontal Resolution
Min.lllumination
SPECIFICATION
Video Output
CCD
Effective Pixels
ON/OFF(OFF / LOW / MIDDLE / HIGH)
OFF ~ x512
3D-DNR
Sens-up
AGC
ON / OFF Motion Detection
ON / OFF(WDR LEVEL, WEIGHT) WDR
COLOR / BW / AUTO / EXT Day & Night
8Windows(Polygonal, 8Colors) Privacy Masking
ON / OFF BLC
ATW / ACW / MANUAL / PUSH White Balance
ON / OFF / V-FLIP, ROTATE Mirror
Specifications