Talos Security NVClient - Manual (Page 13)

User Manual for Digital Surveillance Center Management Software
- 13 -
Disk: Search the storage location for an image.
Date: Search for an image picture by the date saved.
Server: Search for an image picture by the DVR (server) name.
Loop Show: Preview the images saved in the disk.
Print: Print the selected picture.
5.1.1.3 Video Switch On Group
Groups allow you to view cameras from multiple DVRs at one time. For example, if you have
several DVRs in your facility you can set a group named "Entrances" and have all exterior door
cameras in the group. Groups can be switched manually or automatically in a cyclical routine.
Note: It is necessary to enable "Auto Logon" for any DVR added to a group.
Group Name
Add: Click "Add" and enter the name you wish to identify the group then click OK.
Modify: Click a group name (highlight in blue) then click "Modify" to change the group settings.
Delete: Click a group name (highlight in blue) then click "Delete" to remove the group.
Channel Setup
Set: Click a channel from the list, click "Set" to add a camera or edit an existing camera
Clear: Click a channel from the list, click "Clear" to remove the camera from the list
Clear All: Click "Clear All" to remove all cameras from the list