Talos Security NVClient - Manual (Page 10)

User Manual for Digital Surveillance Center Management Software
- 10 -
This field displays the settings for DVRs accessible by the client software and allows you to add a
DVR to the list. Under "Server Manage" click on "Add" to enter the Add Server settings interface.
Add Server Tab
Server Type: Click to choose the DVR server type; select 37DVR.
Address: Enter the IP address of the DVR from the network setup menu.
Local Name: Assign a name to easily recognize a DVR if you have more than one.
CMD Port: Enter the port number used on your router to stream video from the DVR.
Stream Type: Select Main Stream.
Enable Auto Logon: Click to allow NVClient to log into the DVR.
Channel Num: Select the active number of channels in the DVR.
User Name: Enter the user name used to log into the DVR.
Password: Enter the password used to log into the DVR.
Search Tab
If you have a large installation, you can search your network for DVRs and IP Cameras. Click
"Search" to bring up a list of video servers located on your network.