Regency Hampton H300 Large Wood Stove - Manual (Page 20)

20
Hampton H300 Cast Freestanding Woodstove
INSTALLATION
10) Secure the 4 short legs to the unit using the bolts and washers
removed from step 9.
IMPORTANT
Flue center-line dimensions change when using the short leg option.
Also note that the Outside Air Kit (Part # 47000) cannot be used with the short leg option.
11) Carefully bring stove to standing position.
12) Open the front door and place the cast plug into the ash plug hole
and re-install the bricks.
13) Place the cast lid back on top of the stove.
14) Re-install fan, if removed.