Regency Classic F5100 Extra Large Wood Stove - Manual (Page 27)

F5100 Regency Freestanding Woodstove
27
MAINTENANCE
BYPASS DOOR GASKET REPLACEMENT
1. Allow the stove to burn out and cool down, until cool to touch.
2. Open stove door to access bypass door.
4. Remove old gasket and replace with new one.
4. Slide bypass door assembly forward, lower complete assembly with care.
Lift lid on bypass door assembly to reveal gasket.
3. Remove loosen the 3 rear bolts, then remove 3 front bolts. Support from
the front and slide forward to remove Bypass Door Assembly.
Important: Bypass door is very heavy (>18 lbs) - use caution when servicing.
5. Reverse steps to reinstall - ensure the pass rod is seated with the channel
on the pass door.
(Unit viewed as transparent to facilitate view)
Pass rod
Channel
Loosen 3 rear bolts
F5100 Damper Assembly Draft