Summit VC60D - Manual (Page 12)

Display
Digitally displays the temperature
and service indicators.
is for Upper temperature zone and
is for Lower temperature zone.
Indicator Light
The indicator light is located at the left
lower corner of the display. The
indicator light will be on when the multi-
key function is selected. To perform the
multi-key function, press and hold the
first key, then press the second key the
required number of times and then
release both keys.
°F/°C Selector
Select the temperature display setting in
Fahrenheit or Celsius degrees. To
change the temperature from
Fahrenheit to Celsius or from Celsius to
Fahrenheit, press and hold the Light key
for 5 seconds.
Setting the Temperature Control
The unit has two separate temperature
zones. The temperature of both zones
can be set between 41°F and 72°F (5°C
and 22°C). The Lower temperature zone
is ideal for storing red wine at a setting
of 55°F to 72°F (13°C to 22°C). The
Upper temperature zone is suitable for
storing champagne and white wine at a
setting of 41°F to 55°F (5°C to 13°C).
• When the unit is plugged in for the
first time, it will power up
automatically to the preset defaults.
The preset temperature at the factory
for the Upper temperature zone
is 10°C/50°F and for the Lower
temperature zone is 16°C/60°F.
• You can press the left side Up and
Down keys to control the internal
temperature of the Upper
temperature zone and press the
right side Up and Down keys to
control the internal temperature
of the Lower temperature zone.
When you press either key the
first time, the display will show
the last temperature set
previously.
Note: The temperature set for
the Lower temperature zone
must always be just as high or
higher than that in the Upper
temperature zone. For optimal
performance, the set
temperature of the two zones
should differ by at least 7F°
(4C°).
• The temperature that you desire
to set will increase 1°C or 1°F if
you press the Up mark once. On
the other hand, the temperature
will decrease 1°C or 1°F if you
press the Down mark once. The
display flashes while you make
the setting.
• After the temperature has been
set, the display shows the
current inner temperature of the
particular temperature zone.
• To view the set temperature at
any time, press the UP or Down
key. The set temperature will
11