Summit VC60D - Manual (Page 11)

first key, then press the second key
the required number of times and
then release both keys.
°F/°C Selector
Select the temperature display setting in
Fahrenheit or Celsius degrees. To change
the temperature from Fahrenheit to
Celsius or from Celsius to Fahrenheit,
press and hold the Light key for 5
seconds.
Setting the Temperature Control
• The VC28S has a single temperature
zone. The temperature can be set
between 41°F and 72°F (5°C and
22°C) which is ideal for storing red,
white or sparkling wine.
• When the unit is plugged in for the
first time, the unit will power up
automatically to the preset defaults.
The temperature preset at the factory
is 12°C/54°F.
• You can set the temperature as
required by pressing the Up or Down
key. When you press either key the
first time, the display will show the
last temperature set previously. The
temperature will increase 1°C/1°F if
you press the Up key once, and will
decrease 1°C/1°F if you press the
DOWN key once. The display flashes
while you make the setting.
• After the temperature has been set,
the display shows the current inner
temperature.
• To view the set temperature at any
time, press the Up or Down key. The
set temperature will temporarily
flash on the display for 5
seconds. Then the display shows
the current inner temperature
again.
USE AND CONTROL – DUAL ZONE
The Controls of Your VC60D Wine Cellar
Power
To turn the appliance on/off, press
and hold the key for 5 seconds.
Note: Pressing the key once can
switch off the audible alarm
when the alarm is on.
Up
Used to increase (warm) the set
temperature by 1°C/1°F.
Down
Used to decrease (cool) the set
temperature by 1°C/1°F.
Light
To turn the inner light on/off.
10