Behringer EUROPOWER Professional 4 - Manual (Page 12)

12 EUROPOWER EP4000/EP2000 User Manual
Distortion
EP4000 < 0.02%
EP2000 < 0.01%
Frequency Response
at 10 dB below rated output power 20 Hz - 20 kHz, +0/-1 dB
at -3 dB points
5 Hz - 50 kHz
Damping Factor
EP4000/EP2000 > 300 @ 8 Ω
Noise
unweighted, 20 Hz to 20 kHz -100 dB
Voltage Gain
EP4000 50x (34 dB)
EP2000 40x (32 dB)
Input Sensitivity
V RMS (@ 8 Ω) EP2000 1.15 V (+3.4 dBu)
EP4000 1.23 V (+4.0 dBu)
Input Impedance
EP4000/EP2000 10 k Ω unbalanced, 20 k Ω balanced
Controls
Front Power switch, gain control (channels 1
and 2)
Rear DIP switches (10x)
Indicators
POWER green LED
CLIP red LED, 1 per channel
SIGNAL yellow LED, 1 per channel
Connectors
Inputs Balanced XLR and
¼" TRS connectors
Outputs Touch-Proof binding posts and
professional speaker connectors
Cooling
EP4000/EP2000 Continuously variable speed fan,
back-to-front air flow
Amplifier Protection
EP4000/EP2000 Full short circuit, open circuit, thermal
and HF protection Stable into reactive
or mismatched loads
Load Protection
EP4000/EP2000 Turn-on/off muting, AC coupling
Output Circuit Type
EP4000 Class H complementary
linear output
EP2000 Class AB complementary
linear output
Power Supply
Mains Voltage/Breaker
100 - 120 V~, 50/60 Hz 15 A
220 - 230 V~, 50/60 Hz 8 A
Power Consumption
EP4000 2600 W
EP2000 1600 W
Mains connector Standard IEC receptacle
Dimensions/Weight
Dimensions (H x W x D)
EP4000/EP2000 approx. 3.5 x 19 x 15.8"
approx. 88 x 483 x 402 mm
Weight
EP4000 approx. 36.6 lbs / 16.6 kg
EP2000 approx. 34.6 lbs / 15.7 kg
BEHRINGER makes every effort to ensure the highest standard of quality. Necessary modifications are carried
out without notice. Thus, the specifications and design of the device may differ from the information given in
this manual.