Buffalo Technology WHR3-G54 - Manual (Page 39)

39
To enable WDS, set the Wire-
less Bridge (WDS) function to
Enable.
Enter the Wireless MAC
address of the AirStation to
communicate with in the form
of two characters separated by
a colon and click Add.
MAC Address Ex:
00:00:00:00:00:00
Up to six AirStation MAC ad-
dresses may be registered.
Click Apply under Wireless
Bridge (WDS) settings when
the wireless Mac addresses
AirStation are entered.
Repeat this process on every other AirStation used in Bridge (WDS) mode.
Wireless
Bridge (WDS)
Settings
Advanced Settings