SPYPOINT SMART-8 User Manual - Manual (Page 10)

10
I.T.T. mode
The camera is configured by default in I.T.T.
mode (Intelligent Triggering Technology) for
the PHOTO or VIDEO mode.
To change the settings, see the ADVANCED
CONFIGURATION USING THE SMARTSET
SOFTWARE section (p.11).
PHOTO (I.T.T.)
On detection, one photo is taken. If a new movement is detected by the
camera, a second photo is taken within 60 seconds after taking the first
photo. This mode allows the user to always have a subject on the photo.
VIDEO (I.T.T.)
A video of 10 seconds is taken upon detection. If the subject only passes
in front of the camera, it takes only one video of 10 seconds. If the sub-
ject continues to move in front of the camera, the video recording is then
prolonged by 10 second sections, to a maximum of 90 seconds. This mode
allows the user to record the best of the action.
Here are the specifications of I.T.T. mode:
Start time 00:00 Stamp Yes
Stop time 00:00 Quality High
Sensitivity High Temperature °F
Refer to ADVANCED CONFIGURATION USING THE SMARTSET SOFTWARE
section (p.11) for details on each specification.
15s 30s 45s 60s 0s
Photo #1 Photo #2
I.T.T.
PHOTO
oo:oo
o2/21/14 oooo