Components – SPYPOINT BF-10HD User Manual User Manual
Page 6
6
Components
1
Photo lens
Image sensor and infrared filter.
2
Invisible LEDs
Night lighting to obtain black and white
photos and videos.
3
Test light
Flashes in TEST mode when there is detec-
tion and flashes 60 seconds in PHOTO/VIDEO
mode to allow the user to leave without being
photographed or recorded.
4
Light sensor
Allows the lighting of the LEDs panel at night.
5
Fresnel lens
Expands the detection area and increases the
sensitivity of the camera’s motion sensor.
6
Slot for installation
strap
Allows the user to install the camera using
the installation strap included (p.10).
7
Cable lock hole
Allows the user to install a CL-6FT cable lock,
sold separately (p.20).
8
12V power jack
This camera can be powered from an external
12-volt DC input such as a 12V battery or a
12V adapter, each sold separately (p.19).
9
Tripod mount
Standard ¼-20" tripod mount.
10
Microphone
Record sound in video mode (p.15).
11
Solar panel jack
Allows the user to connect a solar panel
(SP-12V) to maintain the charge of the
lithium battery pack (LIT-09/LIT-C-8), sold
separately (p.19).
12
Access to the time
battery
Battery that keeps the time and date in
memory (p.8).
13
Battery switch
Allows the user to select the power source ac-
cording to the type of batteries used (p.7).
14
BUSY LED
Lights up when the camera is recording
15
ON/OFF
Allows the user to turn on/off the camera.
16
Built-in speaker
(BF-12
HD
)
When viewing videos, allows to hear the
sound.
17
Viewing screen
Allows the user to access the main menu and
view photos/videos. Screen with zoom and
pan functions (p.10).
18
Navigation buttons
Buttons to set the camera (p.10).
19
Battery case
Case for AA batteries or a rechargeable
20
TV OUT
Allows the user to view or delete photos/
21
USB port
To transfer photos/videos to a computer
22
SD card slot
An SD card is required to record photos/videos
23
DISTANCE dial
Allows the user to adjust the distance of
detection and the sensitivity of the detector