SPYPOINT BF-10HD User Manual - Manual (Page 13)

13
DISTANCE
Turn the DISTANCE dial to the right to increase the detection distance and
the sensitivity of the detector.
The camera is equipped with a detector sensitive to infrared. The system
will only detect a heat source in motion. The greater the mass of heat,
the more sensitive the system is. The range of detection is between 5 and
65 feet. The best way to adjust the distance is to set the camera to TEST
mode. Make sure to have the least amount of objects possible in front of
the camera during positioning. This will prevent photos being taken by the
camera when oriented towards the sun at the same time an object moves in
front of the camera (e.g. a branch).
Here is a table of approximate detection distances and width of the
detection area according to the DISTANCE dial setting. The data can be
affected by the size of the subject and the outside temperature. Note that
this data is for illustrative purposes only.
Value on dial Sensitivity
Detection
distance (ft)
Width of the
detection area (ft)
MIN
Gradually
increases
5-30 3
2
4
30-50 15
6
8
50-65 30
MAX
Settings/Distance
• Watching on TV:
Allows the user to view or delete the photos or videos directly on a TV.
1. Turn on the camera.
2. Connect the yellow end of the RCA cable supplied into the VIDEO IN of
the TV and the other end into the TV OUT of the camera. The options
are the same as viewing on the screen of the camera (previously men-
tioned).
RCA
CAMERA
3
15
30