Snakebyte Fitness Starter Pack - Manual (Page 5)

GB
OPERATING INSTRUCTIONS
LI-ION BATTERY PACK:
Remove the battery cover and insert the battery pack into the Balance Board’s
battery compartment according to the image below.
In case the Balance Board has not yet been synchronised with the Wii console,
please do that in Standard Mode as described below:
How to sync in Standard Mode:
Press the “POWER” button on the front of your Balance Board until the Power
LED lights up.
Press the “SYNC” button of the Balance Board through the battery pack’s
outer button once. Now press and release the “SYNC” button on the console.
Your Balance Board’s front LED will light constantly, indicating a successful
hardware-handshake of Board and console.
Only one Balance Board can be synchronised with your console at a time.
It will be connected to P4, a Wii Remote that might have been registered as
P4 before will be disconnected.
For further information regarding synchronisation please refer to your Wii
console manual or the manual of your Wii Balance Board compatible software.
The USB charging cable offers a comfortable length of three metres and allows
for simultaneous charging and playing. You may connect the cable to the Wii
console’s or any other USB port. Make sure the port in use offers sufficient
current to charge the battery pack, though.