Snakebyte Xbox 360 Media Remote Control Manual User Manual
Page 3
USING YOUR MEDIA REMOTE CONTROL
The “one key switch” key is the mode key to switch between working on TV and your Xbox 360™ game
console. There is no default mode for the Universal Remote.
To check the mode status, press any one of the keys on the Universal r
Remote. If all the keys on the remote illuminate,
the remote is at the mode for
Xbox 360™. If only the universal keys illuminate,
the remote is at the mode for TV or the electronic
device you have set up for.
The functions on the Xbox 360™ game console
of the Universal Remote keys are the same as
the Microsoft Xbox 360 Universal Media Remote.
Guarantee & Troubleshooting
If you encounter problems, try the possible solutions provided below.
Video or Sound Is Poor or Not Working
Make sure your AV cable is properly connected.
Buttons Don’t Work
Make sure the batteries are still fresh by testing the remote with new batteries. Try removing the batteries
from the remote, pressing all buttons twice, and then replacing the batteries.
Poor Performance with the Xbox 360™ Console
• Make sure that you have fresh batteries in the remote.
• Point the remote directly at the infrared sensor adjacent to memory unit slot A.
• Check to verify that the infrared sensor is not blocked or covered.
• Make sure that you’re using the remote within 10 feet of the infrared sensor.
• Close drapes and blinds during daylight hours to minimize ambient infrared.
IF YOU NEED MORE HELP
Customer Support:
Mail:
Do Not Attempt Repairs
Do not attempt to take apart, service, or modify the Media Remote Control, power supply, or its
peripherals in any way. Doing so could present the risk of serious injury or death from electric shock or
fire, and it will void your warranty.