SATEC RDM172 Quick Start-1 - Manual (Page 8)

7
Table 3-1 RDM Options ( ∗ default setting)
Display Code Parameter Options Description
UPdt Display
update time 0.1 - 10.0 s
(0.5)* Defines interval between
display updates
ScrL Auto scroll nonE*
2-15 s Disables/enables auto scroll
on common measurements
display (main screen) and
defines scroll interval
rEtn Auto return
to the main
screen diS*, En Disables/enables auto return
to the main screen after 30
seconds of uninterrupted
use
VoLt Primary or
secondary
voltage view Pri*, SEc
Defines primary or
secondary voltage to show.
Ph.P Phase
powers
display
mode diS*, En Disables/enables display of
phase powers in common
measurements (main
screen)
Fund. Fundamenta
l values
display
mode diS*, En Disables/enables display of
fundamental values in
common measurements
(main screen)
dAtE Date format ndY*
dnY
Ynd
Defines the date format in
the RTC display: d=day,
n=month, Y=year
Each date format character
is set separately.
Addr Instrument
address 1*-247
diSP
5
ScrL
diSP
0.5
UPdt
diSP
ndY
dAtE
diSP
diS
Ph.P
diSP
diS
rEtn
diSP
Pri
VoLt
diSP
diS
Fund.
diSP
1
Addr