SATEC RDM172 Quick Start-1 - Manual (Page 7)

6
3 Setup on the RDM
3.1 Instrument Setup Menus
Following is a list of instrument setups menus available from the RDM.
Instrument Menu Access from the RDM
Basic yes
Communication ports
yes
User selectable options yes
Analog output, analog expander -
Digital inputs yes
Timer yes
Alarm/Event set points yes
Pulsing output, pulse counter yes
Log memory partitions -
Real time clock yes
Instrument display -
For full setup instructions for these parameters, see the complete PM172
Installation and Operation Manual.
3.2 Performing RDM Communication Adjustment
О О О О
Press to activate middle window. Press▲▼, and scroll to Addr .
Press to activate the lower window. Set the instrument address
value and press to save the selected value.
Press
▲▼, and scroll to bAud . Press to activate the lower
window. Set the baud rate value and press to save the selected
value.
3.3 RDM Setup Menu
О О О О
This menu allows you to view and change RDM properties. Table
1-1 lists available options with their code names and applicable
ranges.
SELECT CHG diSP П Р ENTER ENTER
SELECT CHG diSP П Р ENTER ENTER
SELECT
SELECT
ENTER
SELECT
ENTER