Viewing an rms plot – SATEC PAS User Manual

Page 24

Text mode
Original mode

V I E W I N G L O G F I L E S

local toolbar; to select a non-overlapped view, click on the button

showing

two waveforms.

Waveform data are recorded to files in series that may contain many cycles of the
sampled waveforms. A waveform window can display up to 64 waveform cycles. If
the waveform contains more than 64 cycles, the scroll bar appears under the
waveform pane allowing you to scroll through the entire waveform.

Viewing an RMS Plot

PAS can show you the cycle-by-cycle RMS plot of the sampled AC waveforms. To
open the RMS view, click on the button

representing two curves above

horizontal axes. The RMS view displays the RMS measured over one cycle and
updated each half cycle of the sampled waveforms as per IEC 61000-4.