S&S Cycle Crankcase for Harley-Davidson Twin Cam 88 Engines - Manual (Page 5)

x. Install O-Rings (S&S PN 50-8066) in the counter bores of the oil
line block. Position the oil line block on the engine case and
tighten the screw to 18 ft-lbs. of torque with blue threadlock on
the threads. See Picture 6.
xi. Position hose clamps over the fittings.
xii. Refill oil reservoir.
xiii. Start engine and check for oil leaks.
To Change Engine Oil in the Future
• Slide hose clamp off of fitting along hose. See Picture 7.
• Place an oil drain pan under front of oil pan.
• Remove hose from fitting to drain oil.
• Reinstall hose and clamp.
• Continue with recommended oil change procedure.
1- Block, oil line .............................................................................................31-0430
2- BHSHCS, 5⁄16-18 x 13⁄4 ................................................................................50-0437
3- O-ring (10 pack) ...................................................................................... 50-8066
4- Fitting, pipe, 90˚ (2 pack).....................................................................106-1170
5- Fitting,
7⁄16 (2002–’06) ................................................................................................. 50-0449
3⁄8 (1999–’01) .................................................................................................. 50-0454
6- Fitting, 1⁄2 ....................................................................................................50-0451 7- O-ring (10 pack)....................................................................................... 50-8008
8- Hose, oil supply ........................................................................................ 50-8157
9- Clamp,
Clamp,Spring,Double Wire,.800” ...........................................................50-8293
Hose, spring ...............................................................................................50-8076-S
10- Hose, return oil line, 90˚ bend ..........................................................50-8292
11- Plug, pipe (3⁄8 NPT) ................................................................................50-8330
S&S® Oil Line Installation Kit Replacement Parts for Harley-Davidson® FL Models
5
Picture 6
Picture 7