Brother MFC-7225N - Manual (Page 10)

8
You must set your country so that the machine works
correctly on local telecommunication lines in each
country.
1
Check that the power is turned on by
plugging in the power cord and turn the
power switch on.
Press Menu/Set.
2
Press or to select the country
(AUSTRALIA or NEWZEALAND).
3
Press Menu/Set when the LCD shows your
country.
4
The LCD prompts you to make sure of the
country again.
5
If the LCD shows the correct country, press
1 to go to Step
6 .
—OR—
Press 2 to go back to Step
1 to select the
country again.
6
After the LCD shows Accepted for two
seconds, it shows Please Wait .
The machine displays the date and time, and prints it
on every fax you send.
1
Press Menu/Set.
2
Press 0.
3
Press 2.
4
Enter the last two digits of the year on the
dial pad, and then press Menu/Set.
(e.g. Enter 0, 5 for 2005.)
5
Enter the two digits for the month on the dial
pad, and then press Menu/Set.
(e.g. Enter 0, 3 for March)
6
Enter the two digits for the day on the dial
pad, and then press Menu/Set.
(e.g. Enter 0, 1.)
7
Enter the time in 24-hour format on the dial
pad, and then press Menu/Set.
(e.g. Enter 1, 5, 2, 5 for 3:25 P.M.)
8
Press Stop/Exit.
6
Set Your Country (For
Australia / New Zealand
Customer Only)
Set Country
Press Set Key
Australia
Select
▲▼ & Set
Australia?
1.Yes 2.No
Accepted
7 Set the Date and Time
Year:2005
Month:03
Day:01
Time:15:25
If you make a mistake, press Stop/Exit to
start from Step
1 .
Step 1
Setting Up the Machine