Retsch AS 300 - Manual (Page 21)

07/02/2012 Retsch GmbH
21
Never place the AS200 control “g” directly in
a basin for operation.
Fatal electrical shock hazard.
During wet sieving always connect the AS200
control “g” to a socket which is protected by
a ground fault interrupter.
Adjust the volume of water applied so that it
will just wet the surface of the screen.
Water backing up in the sieve stack can
cause overloading and thus may damage or
destroy the sieve weave.
The loading capacity charts provided in the
Appendix to these operating instructions are
not applicable to wet sieving.
Due to the difficulty in defining the volume of
water in the sieve stack, it is impossible to
make reliable statements for wet sieving.