Retsch AS 200 - Manual (Page 7)

31.07.2012

Retsch GmbH
7
Shipping and installation
Target group: Owner, freight forwarder, operator
Packing
The type of packaging used has been selected in
accordance with the shipping mode. It complies with
generally applicable packaging guidelines.
Please retain the packaging for the duration of the
warranty since, in case of a claim, returning in unsuitable
packaging can jeopadize your warranty entitlements
Shipping
During transportation the AS200 may not be subjected to
impact or vibration; it must not be thrown. The electronic
and mechanical components could otherwise be
damaged.
Temperature fluctuations
In case of wide temperature fluctuations (during shipment
by air, for instance) the AS200 will have to be protected
against condensation; the electronic components could
otherwise be damaged.
Intermediate storage
Also ensure that the AS200 is stored in a dry place.
Requirements for the installation site
Ambient temperature
5°C to 40°C
When the ambient temperature exceeds or falls below that
specified, the electronic and mechanical components may be
damaged, and performance data changed to an unknown
extent.
Humidity:
Maximum relative humidity 80% at temperatures up to 31°C;
linear decline down to 50% relative humidity at 40°C.
At higher humidity, the electronic and mechanical components
may be damaged, and performance data changed to an
unknown extent.
Installation site – altitude:
max. 2000 m above mean sea level
Installation / Shipping nuts