Retsch PM 400 - Manual (Page 4)

08.02.2012 Retsch GmbH
4
Doc. Nr. GB 98.535.9999
Safety
The PM400 is an ultra-modern, highly efficeint product of
Retsch GmbH, corresponding to state of the art. If the
machine is used according to the intended purpose with a
knowledge of this technical documentation it is completely
safe and reliable to operate.
Safety instructions
As operating authority it is your duty to ensure that all
persons charged with working on the PM400:
have read and understood all the instructions on safety,
from the beginning of work know all the instructions and
regulations for the target group relevant to their work,
Have access to the technical documentation for this machine
at all times without problems.
New personnel should be familiarized with safe, proper
handling of the machine before beginning work on the
PM400, either by verbal instruction from a competent
person or through this technical documentation.
Improper operation can cause injury to persons or damage
to the equipment. You are responsible for your own safety
and that of your employees.
Ensure that no unauthorised persons have access to the
PM400.
For your own protection have your employees confirm that
they have been instructed in operation of the PM400. The
draft of a suitable form is given at the end of the section on
safety.
We exclude any claims for damages of any kind for injury to
persons and damage to equipment arising from non-observance of
the following safety instructions.