Retsch MM 200 - Manual (Page 13)

5/21/2012 13 Retsch GmbH
Conditions for the place of installation
Ambient temperature:
5°C to 40°C
If the ambient temperature drops below or exceeds
these values the electronic and mechanical components
can become damaged and performance data are
changed to an unknown extent.
Atmospheric humidity:
Maximum relative humidity 80% at temperatures up
to 31°C,
decreasing linearly down to 50% relative humidity at
40°C.
At higher atmospheric humidity the electronic and
mechanical components can become damaged and
performance data are changed to an unknown extent.
Installation height:
max. 2000 m above sea level
Installation
Mount the MM 200 on a firm, stable laboratory bench
since otherwise vibrations can be transmitted.
Remove transport safeguard:
A transport safeguard, which is marked with an arrow,
is located on the underside of the MM 200.
Unscrew the screw and remove.
Keep the transport safeguard device for transport at
a later date.
Operation with the transport safeguard or transport
without the transport safeguard can cause damage to
the mechanical components.