Shipping and installation – Retsch BB 100 User Manual
Page 8

2/7/2012
Retsch GmbH
8
Shipping and installation
Target groups: Owner, freight forwarder, operators
Packing
The type of packaging used has been selected in accordance with
the shipping mode. It complies with generally accepted
packaging guidelines
Please retain the packaging for the duration of the
guarantee period since, in case of a claim, returning in
unsuitable packaging can jeopardize your guarantee
entitlements.
Shipping
In preparation for shipping the BB 100, attach lifting tackle only
at the eye bolts provided for this purpose.
Refer to the section on operating controls and operation.
The BB 100 shall not be subjected to impact or vibration
during transportation; it shall not be thrown. The
electronic and mechanical components could otherwise be
damaged.
Temperature fluctuations
In case of wide temperature fluctuations (during shipment
by air, for instance) the BB 100 will have to be protected
against condensation; the electronic components could
otherwise be damaged.
Intermediate storage
Also ensure that the BB 100 is stored in a dry place.
Requirements for the installation site
Ambient temperature:
5°C to 40°C
When the ambient temperature exceeds or falls below that
specified, the electronic and mechanical components may be
damaged, and performance data changed to an unknown
extent.
Humidity:
Maximum relative humidity 80% at temperatures up to 31°C;
linear decline down to 50% relative humidity at 40°C.
At higher humidity, the electronic and mechanical
components may be damaged, and performance data
changed to an unknown extent.
Installation site – altitude
max. 2000 m above mean sea level