Retsch BB 100 User Manual
Page 17

2/7/2012
Retsch GmbH
17
Maintenance
CE
Fig. 8
The BB 100 is to be lubricated from time to time.
Fig. 8
Kindly refer to the table below for the quantities of grease and
the lubrication intervals.
The lubrication points are marked with red dots on the unit.
No.
Quan. in kg
Interval, hours of operation
1
0.005
50
2
0.003
50
Use the grease gun supplied with the BB 100 for lubrication
purposes.
Ordinary multi-purpose graese can be used as lubricant, e.g. EP
4685 by ESSO / SHELL or BP.
Functional inspections
The limit switch at the fill hopper is to be checked semiannually
for proper functioning. Fig. 9
Unscrew the two cap screws E in front of the fill hopper B.
Swing the fill hopper to the rear.
The BB 100 comes to a stop
Close the fill hopper B.
The BB 100 must not restart.
Screw in the machine screws E.
Start the BB 100.
Fig. 9
- BB 50 (41 pages)
- BB 200 (24 pages)
- BB 300 (24 pages)
- Cryomill (68 pages)
- CryoMill Autofill 50l (28 pages)
- DM 200 (20 pages)
- DM 400 (60 pages)
- Emax (67 pages)
- GM 200 (44 pages)
- GM 300 (44 pages)
- MM 200 (32 pages)
- MM 400 (32 pages)
- PM 100 (44 pages)
- PM 400 (36 pages)
- PM GrindControl (48 pages)
- RM 200 (36 pages)
- RS 200 (32 pages)
- SK 100 (24 pages)
- SM 100 (48 pages)
- SM 200 (48 pages)
- SM 300 (44 pages)
- Cyclone - SM 300 (20 pages)
- SR 200 (24 pages)
- SR 300 (24 pages)
- TWISTER (44 pages)
- ZM 200 (32 pages)
- AS 200 jet - Automatic Vacuum Regulation (6 pages)
- AS 200 control - natural frequency (32 pages)
- AS 200 (36 pages)
- AS 200 jet (56 pages)
- AS 200 jet (48 pages)
- AS 200 tap 30.025.0001 (28 pages)
- AS 200 tap 30.025.1001 (28 pages)
- AS 300 (32 pages)
- AS 400 (32 pages)
- AS 400 (28 pages)
- AS 450 basic (40 pages)
- AS 450 basic (44 pages)
- AS 450 control (52 pages)
- DR 100 (40 pages)
- DR 100 (28 pages)
- PP 25 (32 pages)
- PP 40 (28 pages)
- PT 100 (36 pages)