Purus Living 800 - Drop/Twist Grate - Manual (Page 16)

16
1 2 1 2
1. Lift out the water trap as above.
2. If necessary, rinse the water trap underwater as shown in picture 2.
3. Replace the water trap.
Hold the water trap with the spring loaded body open whilst
rinsed clean. Alternatively you may use a brush.
Make sure the gaskets are completely clean so the trap is
watertight. Ensure when placed back that the gully is fully
inserted so the gasket is watertight using two thumbs at each
side.
CLEANING AND MAINTENANCE
21424
Our ongoing product development may cause changes in the
specifications. We reserve these rights.