Reduce the foot presser and turn the
dial on the machine lowering the feed
dogs for free motion quilting.
Also the needle threader will not work
when this foot is in use.

Walking Foot

Forked part
of operation
lever

Secure the
capscrew
with a
screwdriver.

Insert the forked part of the op-
eration lever while raised in an
upright position onto the screw
as shown and then insert the
capscrew.

Tighten the screw securely with a
screwdriver. Tightening ad-
equately is important as the
screw might loosen due to the
foot and forked operation lever
vibration.

Note

• Do not press the pedal all the

way down.
Try to keep the sewing speed be-
low 70% of the maxinum speed.

• The cloth may not feed if you

sew at high speeds.

• The feed dog for feeding the

cloth may not move if the clamp-
ing pressure on the cloth is too
strong.

• It is not advisable or necessary

to use the Pin Feed mode with
the walking foot.

This manual is related to the following products:

PQ-1500 1500S