MacDon 4000 Mower Conditioner - Manual (Page 70)

70
UNLOADING & ASSEMBLY
INSTALL HITCH SHIFT CYLINDER
1. Move hitch to transport position.
2. Install hydraulic cylinder with rod end at
position (A) and barrel end at position (B).
WARNING: Before transporting
mower conditioner, close hydraulic
valve (C) to prevent inadvertent
cylinder extension that would cause machine
to swing out unexpectedly. Closed position is
with handle at 90º to oil flow direction as
shown. Open position is with handle in line
with oil flow direction.
ROUTE HOSES AND ELECTRICAL HARNESS
1. Route hoses for hitch shift and header lift
cylinders and electrical harness through hitch
loops, securing harness to hydraulic hoses
with nylon ties.
ADJUSTMENTS AND CHECKS
Perform the final checks and adjustments as listed
on the "Pre-Delivery Checklist" (yellow sheet) to
ensure the machine is field-ready.
INSTALL HITCH SHIFT CYLINDER
A
B
C
ROUTE HOSES AND HARNESS