MacDon 4000 Mower Conditioner - Manual (Page 22)

22
OPERATION
LIFT CYLINDER STOP
(RAISING AND LOWERING MOWER CONDITIONER)
WARNING: To avoid bodily injury or
death from fall of raised machine,
always engage lift cylinder stop
before going under mower
conditioner for any reason.
To engage cylinder stops:
1. Raise machine to maximum height by
activating remote cylinder control valve in
tractor.
2. Remove pin (A) and move support (B)
forward, aligning hole in support with slot in
frame lug.
3. Replace pin (A) to secure the support in the
engaged position.
4. Lower machine slightly so support takes some
weight.
To lower mower conditioner:
1. Raise machine to maximum height to take
weight off support (B).
2. Remove pin (A) and move support back to
disengaged position.
3. Replace pin (A) to secure the support in
disengaged position.
4. Lower machine by activating remote cylinder
control valve in tractor.
LIFT CYLINDER STOP