Precision Turbo and Engine BigStuff3 GEN3 PRO SEFI DAE Option User Manual - Manual (Page 7)

Bigstuff3 GEN3 PRO SEFI DAE Option - User Manual
Input Shaft Speed
with a two (2) wire Variable Reluctance (VR) style sensor (not a hall-
ation on the interface required for this input.
rive Shaft Speed
d for boost vs. RPM comparisons and for calculating the amount of
iable Reluctance (VR) style sensor (not a hall-
an Vacuum
essure can be logged using a 2 Bar MAP sensor, BigStuff3 part number JMI-
his connector must interface T
effect device).
ontact BigStuff3 for more inform C
D
rive shaft speed can be logge D
torque converter slippage. The sensor calculates a 16 bit drive shaft RPM. The GEN3 ECU can
accommodate input wheels with 1, 2, 4, or 40 teeth.
his connector must interface with a two (2) wire Var T
effect device).
P
he pan vacuum or pr T
003-004, which will read and record the pan vacuum/pressure in inches of mercury. A negative
number represents vacuum and a positive number represents positive pressure in the crank case.
7