Powertrax 4110 - Manual (Page 12)

12
Figure 7
Install coupler/thrust washer assemblies
5. Repeat this step for the other driver-and spacer
assembly (Figure 8).
Differential Case Completion
Summary of steps in this section:
a) Rotate drivers; align holes
b) Push shear pin into other driver
c) Install spring assembly
d) Repeat for other pins and springs
e) Push spacers outward
f) Install pinion shaft and retaining pin.
1. Rotate the right driver until one of its long window
holes (containing a pin faces out, and rotate the other driver until
one of its empty pin holes lines up with the first window hole.
2. Push the pin out of the window hole and into the pin
hole in the opposite driver with a small pointed tool (Figure 9).