PLX Devices Legion Gen2 11,000 mAh User Manual
Page 7

PLX
devices inc.
www.plxdevices.com
7
Toggling Menus
Sleep Mode
To toggle through the menus, press and release the button located to the right of the Organic LED Display.
To conserve battery power and battery life, Legion automatically turns off the Organic LED Display after
30 seconds of inactivity. Simply press and release the button to turn the display back on.
About Legion Menus
Four different menus may be displayed on Legion’s Organic LED Display. These menus include Time Remaining,
Battery Percentage, Electrical, and Health.
Time Remaining
When the Time Remaining menu is selected, either the Time to Discharge or the Time to Charge will be dis-
played. Time to Discharge will be displayed if nothing is plugged into Legion or if Legion is charging a device.
This simply tells you how much time is left before your Legion battery needs to be charged. Time to Charge will
be displayed if Legion is being charged. This lets you know how much longer you need to charge your Legion
battery for it to reach full capacity. Please note that the time remaining (Time to Discharge and Time to Charge)
does not display the time remaining for your mobile device. The information displayed is information based
soley on your Legion battery.
NOTE: Allow about 15 seconds for Legion to learn the device when charging in or out.
Battery Percentage
The Battery Percentage menu will display the percentage of your maximum battery capacity numerically and
graphically. The remaining battery capacity will also be displayed in mAh.
Electrical
The Electrical menu will cycle through three different screens: Voltage, Current, and Power. These screens will
tell you the voltage of your Legion battery, and the current and power draw of your Legion battery.
NOTE: If nothing is connected to your Legion, you should expect to see a low current (0.05A or less).
Health
The Health menu will alternate between two different screens: Condition and Charge Cycles/Temperature. The
Condition screen will indicate what condition (New, Good, Ok, Poor, Bad, or Replace) your Legion battery is in.
The other Health screen will display how many times Legion has been fully charged as well as the temperature of
the battery in degrees Fahrenheit and degrees Celsius.
NOTE: Please note that LiPo batteries operate more efficiently at lower temperatures.