PLX Devices Kiwi 2 Bluetooth - Manual

Version 1.0
Step One
Plug Kiwi® 2 Bluetooth into OBD II port
The OBD II port is typically located under the steering column and should not require any tools to access.
Press and hold power button
Step Two
Go to Settings on your Android phone
Step Three
Tap on Wireless & networks
Under Bluetooth Devices, tap on PLXKiwiBT to begin pairing
Step Five
Tap Pair
Step Six
Launch your favorite app!
Setting up the Kiwi 2 Bluetooth
Standby function
The Kiwi® 2 Bluetooth has a feature which allows for power savings
when not in use. It will go into mode 5 minutes after the user exits
the Android app on their mobile device or a period of no data transmission.
The Kiwi® 2 Bluetooth can be awakened by a single press of the side button.
Step Four
Check the Bluetooth box and then tap Bluetooth settings, select Scan for Devices