Step one, Parts list, Step two - without soundbar – Pavement Ends 41520 Sun Cap User Manual
Page 2
41520 pg 2
Rev. B 1210
Plastic Strip
Windshield
Driver's Side of Vehicle
Windshield Channel
Fabric
Make sure that only Plastic
Strip is in channel
Step One
Orient the Sun Cap on the vehicle and drape it over the bows. Insert the plastic
strip sewn along the front of the Sun Cap into the windshield channel. Do not
catch the fabric in the channel. Center the Sun Cap on the vehicle so that it is
an equal distance from the top of the windshield fl ange on both sides.
Parts List
Sun Cap
Qty - 1
View from front
Make sure space between top fabric
and windshield fl ange is equal on
both sides
Note: For best possible installation, check to
make sure that the top is perfectly centered
on the vehicle.
Step Two - Without Soundbar
Drape the fabric over the center sport bar. Make sure that the long
tails of the straps and the buckles are behind the sport bar. Wrap the
long web strasps around the rear sport bars and thread through the
corner buckles. Wrap the hook and loop around the center sport bar
with the loop in front of the bar and the hook behind the bar.
Wrap the long center strap at the rear of the Sun Cap around the sport
bar, pull it forward into the vehicle to the windshield. Thread the strap
through the footman loop on the windshield frame. Then pull the end
of the strap back and thread it through the buckle. Tighten it securely.
Threading Strap
through Buckle
Loop - In Front
of Sport Bar
Center Strap - Thread
through Footman Loop
Buckle - Behind
Sport Bar
Buckle
Footman Loop
Strap
Hook - Behind
Sport Bar