Pavement Ends 51130 Replay - Manual (Page 2)

51130 pg 2 Rev. D 0204
Step Two
Insert front of top into
windshield retainer.
Plastic Strip
Fabric
Windshield
Retainer
Windshield
Driver's Side of Vehicle
View from inside top Snap to bows
Bows
Parts Kit
Top Fabric Assembly Qty - 1
Quarter Window, Right Qty - 1
Quarter Window, Left Qty - 1
Rear Curtain (Window) Qty - 1
Door Assembly, Rt. Qty - 1
Door Assembly, Lt. Qty - 1
Note: Before beginning this installation,
remove the old top and make sure all hard-
ware is in place and that the Drip Rails are
locked into the Windshield Frame.
Step One
Locate the top and orient it on
the vehicle. Snap it to the bows.
Front Support
Bow
Front
Bow must slip into
notch in belt rail
Step Three
Push front support bow
all the way forward.