Configuration menu – Brainboxes RS232 User Manual

Page 18

Manual for BL-521 5_3.doc

Page 18 of 41

Select the Port that you have connected the BL-521 to. All other fields will
then be “greyed out” then Click OK.

Select the communications parameters that your device is configured to.
In this example we have used the factory defaults normally applied. If you
have previously reconfigured these values, then you will need to make
sure the settings here match those you have configured to device to be.

Click OK

HyperTerminal should now be running.

Now hit the “Enter” key once. This should activate the main configuration
menu as shown in Main Menu below. You should be able to now interact
with the menus as described in the following sections.

4.2. Configuration Menu.

4.2.1. Navigation

As a general principle, from any menu screen hitting the “Enter” key refreshes the current menu and hitting the
“Esc” or “Escape” key returns the user to the previous menu or skips a particular option.

Menu selection is performed by pressing the number on your keyboard that corresponds to the number listed on the
menu item you wish to view/configure.

Reminder: The configuration menu is not available whilst a radio (Bluetooth) connection is established.