Orbit Baby G3 Stroller Base and Stroller Seat - Manual (Page 25)

Manual Text Booklet – Orbit Baby Stroller Seat and Stroller Base – ENGLISH – 17
Packing the stroller seat for travel or storage
⃞ Remove the support bar Ⓓ and footrest Ⓖ. Undock the stroller seat from the SmartHub Ⓕ. Fold
the stroller seat by squeezing the fold slider at the bottom of the stroller seat hub Ⓔ and pushing
the hub all the way forward.
⃞ Put the stroller base handlebars in their lowest position.
⃞ Remove both of the stroller front wheels Ⓚ by pushing the release button Ⓘ and pulling down on
the wheel.
⃞ Place the folded stroller base with the SmartHub facing up and nest the stroller seat onto it with the
stroller seat hub located next to the stroller base twist grip Ⓡ.
⃞ Orbit Baby recommends always using the Orbit Baby Stroller Travel Bag (sold separately) when
traveling to protect your stroller.
Cleaning
Avoid excessive exposure to sun or heat, which may cause fading or warping. Keep the SmartHub,
twist grip and handlebar mechanisms free of abrasive grime and moisture. If wet, use a soft cloth to
dry. Regularly check all rivets, screws and safety devices for tightness and security. Inspect restraint
harness and wheels and replace if necessary. All hard goods (plastic and metal) may be wiped clean
with a damp cloth. Never use bleach or detergents. Do not submerge or use running water on any
metal or plastic parts of the stroller. Orbit Baby's Cream Scrub is approved for use on all plastic and
metal parts of the stroller.
⚠
WARNING
⚠
◦
To prevent entrapment and falls, upholstery must be properly attached.