Warning – Orbit Baby G3 Stroller Base and Stroller Seat User Manual
Page 13

Manual Text Booklet
– Orbit Baby Stroller Seat and Stroller Base – ENGLISH – 5
⚠
WARNING
⚠
FAILURE TO FOLLOW THESE WARNINGS AND THE INSTRUCTIONS COULD RESULT IN
SERIOUS INJURY OR DEATH
◦
Do not let others use the Orbit Baby Stroller or other connected Orbit Baby products unless
they understand how to properly use them.
◦
Do not use the stroller if any part is damaged, broken, torn or missing. Do not use the
stroller seat if it is damaged or broken. Use only replacement parts supplied and approved
by the manufacturer. If the instruction manual is missing or you need replacement parts or
assistance, see the contact information included with this product.
PREVENT SERIOUS INJURY OR DEATH
◦
NEVER leave your child unattended.
◦
Always provide the supervision necessary for the continued safety of your child.
◦
Stroller must be fully erected and locked in position prior to use.
◦
NEVER use the stroller seat in motor vehicles.
◦
Do not use with more than one child in a seat at a time.
◦
Maximum child height for the stroller seat is 40 in (101 cm). When using stroller seat on
the Helix SmartHub Attachment, the maximum child height is 40 in (101 cm) on the front
SmartHub and 34 in (86 cm) on the rear SmartHub.
◦
Maximum child weight in any seat on the G3 Stroller Base is 50 lbs (23 kg). Maximum child
weight in the G3 Stroller Seat on the G3 Stroller Base is 50 lbs (23 kg). Maximum child
weight in the G3 Stroller Seat on the Helix SmartHub Attachment or the Stroller Frame G2
is 40 lbs (18 kg).
FALL HAZARD: Avoid serious injury from falls or tipover.
◦
Always use the stroller seat harness to secure the child.
◦
Always use the Orbit Baby Infant Insert for infants under 15 lbs (7 kg). Use the infant insert
only when the shoulder straps are in the lowest position. Infant insert must be used to
ensure that the stroller seat harness properly restrains your child.
◦
The stroller seat must be securely locked into a SmartHub and locked into use position
before loading child.