Northern Connectors Harting Han-Yellock Industrial Connectors - Manual (Page 34)

25
.
34
Han-
Yellock
Features
• Snap-in assembly from mating side and from termi-
nation side
• Wiring with male and female contacts
• Finger safe design
• Fast and tool-less assembly
Current carrying capacity
The current carrying capacity of the connectors is limited by the
thermal load capability of the contact element material including
the connections and the insulating parts. The derating curve
is therefore valid for currents which flow constantly (non-inter-
mittent) through each contact element of the connector evenly,
without exceeding the allowed maximum temperature.
Measuring and testing techniques according to
DIN EN 60 512-5-2
Operating current
Ambient temperature
➀ wire gauge: 1.5 mm²
➁ wire gauge: 2.5 mm²
➂ wire gauge: 4 mm²
Technical characteristics
Specifications DIN EN 60 664-1
DIN EN 61 984
Monoblocks
Electrical data
acc. to EN 61 984 16 A 500 V 6 kV 3
Rated current 16 A
Rated voltage 500 V
Rated impulse voltage 6 kV
Pollution degree 3
Pollution degree 2 also 16 A 690 V 8 kV 2
Insulation resistance ≥ 10 10 Ω
Material polycarbonate
Limiting temperatures -40 °C ... +125 °C
Flammability acc. to UL 94 V 0
Mechanical working life
- mating cycles ≥ 500
Contacts
Material copper alloy
Surface
- hard-silver plated 3 µm Ag
- hard-gold plated 2 µm Au over 3 µm Ni
Contact resistance ≤ 2 mΩ
Crimp terminal
- Wire gauge 0.14 ... 4 mm²
- AWG 26 ... 12
Stripping length 6.5 mm
Tools see chapter 99
Han-Yellock ® Monoblock 60