Northern Connectors Harting Han-Yellock Industrial Connectors - Manual (Page 28)

25
.
28
Han-
Yellock
Han-Yellock ® Adapter frames
Features
• Flexible design of interfaces with the aid of
Han-Modular ®
• Snap-in assembly from mating side and from termi-
nation side for Han-Yellock ® 30 and 60
• Removal from mating side and from termination side
possible for Han-Yellock ® 30 and 60
• Fast and tool-less assembly
• Mounting of adapter frame Han-Yellock ® 20 from
termination side only
Technical characteristics
Specifications DIN EN 60 664-1
DIN EN 61 984
Adapter frames
Number of modules 1 / 2 / 4
Material PC
Flammability acc. to UL 94 V 0
Assembly
• The adapter frame can be snapped into the housing, bulk-
head mounting, on the termination side and the mating side
(refer to the illustration).
• The lateral plastic tabs („B“) are pressed into the metal
clamps on the housing.
• The adapter frame then snaps in with a distinctly audible click.
① metal clamp
Removal
• The removal tool part no.
"https://b2b.harting.com/ebusiness/en/
11 99 000 0001
"
is required for disas-
sembly.
• The removal tool is inserted into the metal clamp and pressed
down as shown in the following illustration. A screwdriver
need also be placed into the notch in the housing.
• The removal tool should then be pulled outwards to remove
the adapter frame from the housing.
• The removal can be made from the termination side as well
as from the mating side.
• The process is identical for both housings, bulkhead moun-
ting, and carrier hoods.
Han-Yellock ®
Hood/Housing
Quantity
Han-
Yellock
®
30
Han-
Yellock
®
30
Han-
Yellock
®
60
Han-
Yellock
®
60
Han-
Yellock
®
60
Combinations
Han-Yellock ® 20 Adapter frame 1 2 1
Han-Yellock ® 30 Adapter frame 1
Han-Yellock ® 60 Adapter frame 1
Han-Yellock ® Module 1 2 4