Northern Connectors Harting Han-Yellock Industrial Connectors - Manual (Page 16)

25
.
16
Han-
Yellock
Han-Yellock ® 30 + 60 Hoods/Housings
Features
• Two-part hoods for easy wiring and testing
• High robustness via an internal locking mechanism
• Earthed contacts PE in crimped or Quick Lock termi-
nation technique
• Protection cover retrofit on housing side
➀ Shell with top entry
➁ Thread M20 ... M40
➂ Carrier hood with push button release
➃ Housings bulkhead mounting
Technical characteristics
Shells and Housings, surface mounting
Material aluminium die-cast
Surface Epoxy powder paint
Locking element stainless steel
Limiting temperatures -40 °C ... +125 °C
Degree of protection acc. to DIN EN 60 529
for coupled connector IP 65 / IP 67
Tightening torque
M4 fixing screw 1.2 Nm ... 2,0 Nm
Carrier hoods and Housings, bulkhead mounting
Number of Han-Yellock ® modules
Han-Yellock ® 30 3
Han-Yellock ® 60 6
Material zinc die-cast
Surface zinc passivation
Locking element PA / stainless steel
Hoods/Housings seal NBR
Limiting temperatures -40 °C ... +125 °C
Un-/Locking temperatures -10 °C ... +85 °C
Degree of protection acc. to DIN EN 60 529
for coupled connector IP 65 / IP 67
Mechanical working life
- mating cycles < 500
PE contact
wire gauge ≤ 4 mm²
Tightening torque
M4 fixing screw 1 Nm
panel fastener 2.3 Nm
➀ M4 fixing screw (screw length > 20 mm)
➁ panel fastener
Protection covers
Material PA
Hoods/Housings seal NBR
Degree of protection acc. to DIN EN 60 529
for coupled connector IP 65 / IP 67
Flammability acc. to UL 94 V 0