Northern Connectors Harting Han-Yellock Industrial Connectors - Manual (Page 24)

25
.
24
Han-
Yellock
Han-Yellock ® Quick Lock module
Features
• Snap-in assembly from mating side and from termination side
• Bus bar within bridge attachements
• Finger safe design
• Fast and tool-less assembly
• Compatible with Han-Yellock ® modules with crimp termination
Placement for Han-Yellock ® 30
with 3 Han-Yellock ® modules
Placement for Han-Yellock ® 60
with 6 Han-Yellock ® modules
Current carrying capacity
The current carrying capacity of the connectors is limited by the
thermal load capability of the contact element material including
the connections and the insulating parts. The derating curve
is therefore valid for currents which flow constantly (non-inter-
mittent) through each contact element of the connector evenly,
without exceeding the allowed maximum temperature.
Measuring and testing techniques according to
DIN EN 60 512-5-2
Operating current
Ambient temperature
➀ wire gauge: 1.5 mm²
➁ wire gauge: 2.5 mm²
for connector with 3 Han-Yellock ® modules, fully loaded
(multiplier 1:1)
Technical characteristics
Specifications DIN EN 60 664-1
DIN EN 61 984
Quick Lock Modules
blue slide
Electrical data
acc. to EN 61 984 20 A 500 V 6 kV 3
Rated current 20 A
Rated voltage 500 V
Rated impulse voltage 6 kV
Pollution degree 3
Pollution degree 2 also 20 A 690 V 8 kV 2
black slide
Electrical data
acc. to EN 61 984 10 A 500 V 6 kV 3
Rated current 10 A
Rated voltage 500 V
Rated impulse voltage 6 kV
Pollution degree 3
Pollution degree 2 also 10 A 690 V 8 kV 2
Insulation resistance ≥ 10 10 Ω
Material polycarbonate
Limiting temperatures -40 °C ... +125 °C
Flammability acc. to UL 94 V 0
Mechanical working life
- mating cycles ≥500
Contacts
Material copper alloy
Surface
- hard-silver plated 3 µm Ag
Contact resistance ≤ 2 mΩ
Quick Lock termination
blue slide
- Wire gauge 0.5 ... 2.5 mm²
- AWG 20 ... 14
- Stripping length 10 mm
- Max. insulation diameter 3.6 mm
black slide
- Wire gauge 0.25 ... 1.5 mm²
- AWG 23 ... 16
- Stripping length 10 mm
- Max. insulation diameter 3 mm
PE contact
Material copper alloy
Surface
- hard-silver plated 3 µm Ag
Contact resistance ≤ 2 mΩ
Crimp terminal
- Wire gauge 6 mm² / 10 mm²
- AWG 10 / 8
Stripping length 7.5 mm
Suitable crimping tool
"https://b2b.harting.com/ebusiness/en/
09 99 000 0377
"