Northern Connectors Souriau UTL Series Push-Pull Connectors - Manual (Page 29)

29 © 2012 – SOURIAU
UTL Series
Technical information
Specifi c contacts sealed
Coaxial contacts
See cabling notice chapter Appendices, pages 52 to 56.
Standard contacts
Note: endurance of SHANDLES tool = 5 000 cycles.
Crimptooling table
Contact size Part number Head Handles Extraction tools
#16
1.6mm
RM/RC 28M1-
S16RCM20
SHANDLES RX2025GE1
RM/RC 24M9-
RM/RC 20M13-
RM/RC 20M12-
RM/RC 16M23 - S16RCM16
RM/RC 14M30- S16RCM14
SM/SC 24M1-
SM/SC 24ML1-
S16SCM20
SM/SC 20M1-
SM/SC 20ML1-
SM/SC 16M1-
SM/SC 16ML1-
S16SCML1
SM/SC 14M1-
SM/SC 14ML1-
SM/SC 16M11-
SM/SC 16ML11-
S16SCML11
Contact size Part number Head Handles Extraction tools
#16
1.6mm
RM/RC 16M25- S16RCM1625
SHANDLES RX2025GE1
RM/RC 14M25- S16RCM1425
RX2025GE1
Contact size Extractor
#16 RX2025GE1
Extraction tools
Extraction tools instruction
Extraction:
Place the tool into the cavity from front face of the connector, push on the handle, then remove the contact.
T
echnical information