New Era HEATER-KIT-1LG Syringe Heater - Manual (Page 10)

New Era Pump Systems Inc.
www.SyringeHeater.com
Model HEATER-KIT-1
Publication #1200-01 9 04/23/14
=> [] Valid values: 1 to 99
=> [] Valid values: 0 to 99
=> "any printable character" []
=> { | . } Floating point digits
=> { 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 } Digits
=> “one byte of any data”
( ) One byte of data expressed as (0xhh), where ‘hh’ is the
data in hexadecimal.
=> Is defined by. Syntax expands to next level of
expansion.
< > Non-terminal syntax expansion
[ ] Optional syntax
{ } Required syntax
| Or. Choose one of the syntax options.
λ None. Syntax expands to nothing (lambda production).
" " Description of syntax expansion
7.2.2 RS-232 Protocol: Basic Mode
Command syntax (to device):
=>
Response syntax (from device):
=>
In the “Basic” communications mode, a master-slave protocol is used, whereby the device will only
transmit in response to a received command.
When the device receives the , will automatically be stripped
of all space and control characters, and all text will be converted to upper case. This simplifies
communications with the device when commands are being manually typed in from a generic terminal
emulator.
7.2.3 RS-232 Protocol: Basic Mode Common Syntax
=> { | }
=> [
To device
=> From device
=> { | } Operational state of device
=>
S Heater Stopped
H Heater Active
A Heater Alarm
=> A ? Alarm
=>
R Heater power was reset (power was interrupted)
E Error
O Out of range
H High temperature alarm
F Sensor Fault
Device network address, 0 to 99
* System command (overrides network address)
=> Response to command