Multiquip SP2S20H20A - Manual (Page 31)

SP213H20A / SP2S20H20A SAWS — OPERATION AND PARTS MANUAL — REV. #1 (05/17/10) — PAGE 31
The engine governor speed has been set at the factory.
Changing the governor speed could damage the blade and/
or the saw or create a risk for injury to the operator.
CAUTI CAUTI CAUTI CAUTI CAUTION
ELECTRIC START-UP (20HP HONDA ENGINE)
The following start-up procedure makes reference to a HONDA
20 HP Engine (Electric Start)
NEVER place hands or feet inside the belt
guard or blade guard while the engine is
running. ALWAYS shut the engine down
before performing any kind of
maintenance service on the saw.
Keep Wheel Clamp applied (lever DOWN)until
completely ready for cutting operation.
Figure 30. Wheel Clamp
D
CAUTI CAUTI CAUTI CAUTI CAUTION
D
CAUTI CAUTI CAUTI CAUTI CAUTION
DO NOT attempt to operate the saw until
this manual has been read and thoroughly
understood. Engine operating steps may
vary. See included engine manufacturer's
operating manual.
Ensure the work area is clear of tool, debris, and
unauthorized people.
When the engine is running the cutting
blade is ALWAYS
rotating. Keep
hands and feet clear of rotating blade.
Raise the saw to full height when
maneuvering the saw within the cutting
area.
1. Ensure the wheel clamps are in the LOCKED position.
(Figure 30).
Figure 31. Engine Shutdown Switch (Handlebar)
All displacement of the machine
outside the cutting area shall be carried
out with the tool not in rotation.
WARNING WARNING WARNING WARNING WARNING
WARNING WARNING WARNING WARNING WARNING
CAUTION CAUTION CAUTION CAUTION CAUTION
NOTE
The Engine Shutdown Switch located
on the handlebar (Figure 31) serves
both as an Emergency Engine Shut-
Off and as the primary Shutdown
switch. This allows the operator to
shutdown the saw safely away from
moving parts.
2. Ensure the engine Shutdown switch on the handlebar and
the engine ON/OFF switch on the engine are both in the
OFF position to avoid accidental starting. (Figures 31 and
32)
NOTE
After shutdown on Electric Start models,
ensure the Engine Start switch
(Figure 32) is turned to the OFF
position to avoid battery discharge and
accidental starting.
ELECTRIC START-UP (20HP HONDA ENGINE)