Mp2 masonry saw — safety message alert symbols – Multiquip MP2090HP User Manual
Page 9
MQ MP2 MASONRY SAW — OPERATION MANUAL — REV. #2 (3/12/13) — PAGE 9
MP2 MASONRY SAW — SAFETY MESSAGE ALERT SYMBOLS
NEVER tamper with the factory
settings of the engine governor or
settings. Personal injury and damage
to the engine or equipment can result
if operating in speed ranges above
maximum allowable.
ALWAYS wear approved respiratory
protection that complies with ANSI-
Z87.1.
ALWAYS wear approved eye and
hearing protection that complies
with ANSI-Z87.1
Other important messages are provided throughout this
manual to help prevent damage to your concrete saw,
other property, or the surrounding environment.
Engine exhaust gases contain
poisonous carbon monoxide. This
gas is colorless and odorless, and
can cause death if inhaled. NEVER
operate this equipment in a confined
area or enclosed structure that does
not provide ample free flow air.
Gasoline is extremely flammable, and
its vapors can cause an explosion if
ignited. DO NOT start the engine near
spilled fuel or combustible fluids. DO
NOT fill the fuel tank while the engine
is running or hot.
DO NOT overfill tank, since spilled fuel could ignite if
it comes into contact with hot engine parts or sparks
from the ignition system. Store fuel in approved
containers, in well-ventilated areas and away from
sparks and flames. NEVER use fuel as a cleaning
agent.
HAZARD SYMBOLS - Gasoline Powered Models
This
saw, other property, or
the surrounding environment
could be damaged if you do
not follow instructions.
NOTE
ALWAYS place the engine ON/
OFF switch in the OFF position,
when the saw is not in use.
WARNING - Accidental Engine Starting
WARNING - Over Speed Conditions
CAUTION - Respiratory Hazard
CAUTION - Sight and Hearing Hazards
CAUTION - Equipment Damage Messages
WARNING - Lethal Exhaust Gases
WARNING - Explosive Fuel