Mp2 masonry saw — rules for safe operation – Multiquip MP2090HP User Manual
Page 12
PAGE 12 — MQ MP2 MASONRY SAW — OPERATION MANUAL — REV. #2 (03/12/13)
MP2 MASONRY SAW — RULES FOR SAFE OPERATION
Emergencies
■ ALWAYS know the
location of the nearest
fire
extinguisher
.
■ ALWAYS know the location of the
nearest and
first aid kit
.
■ In emergencies
always
know the location of the
nearest phone or
keep a phone on the job site
.
Also know the phone numbers of the nearest
ambulance
,
doctor
and
fire department
. This
information will be invaluable in the case of an
emergency.
Saw Transportation Safety
■ Use an appropriate lifting equipment to ensure the safe
movement of the saw.
■ DO NOT use the handles as lifting points.
■ Safeguard against extreme saw attitudes relative to level. An
engine tipped to extreme angles may cause oil to gravitate
into the cylinder head making the engine start difficult.
(Gasoline powered engines)
■ NEVER transport the saw with the blade mounted.
Saw Maintenance (Cleaning)
■ ALWAYS clean the saw before maintenance or repair.
■ DO NOT use aggressive cleaners (i.e. containing solvents).
DO NOT use high pressure water jets, aggressive detergents
or solutions and liquids with a temperature exceeding 86 F.
Use a fluff-free cloth only.
■ Use a cloth which may be lightly moistened only for removing
dust and dirt. Hard packed dirt can be removed with a
soft
brush.
■ NEVER let water, cleaning liquid or vapor penetrate into the
electric motor, connectors, plugs, and switches. When
cleaning cover all apertures or openings on all electrical
components.
■ ALWAYS use a soft, low-pressure water jet and a brush to
rinse dirt and incrustations away. Be particularly careful not
to spray water on sensitive parts of of the saw (e.g. electric
motor, ON/OFF switch). Clean the motor and ON/OFF switch
by wiping with a
moist
cloth.
■ DO NOT rinse the bearings of the drive elements (gasoline
model only).
■ Ensure that the blade does not come into contact with the
ground or surface during transportation. DO NOT drop the
blade on ground or surface.
■ The engine governor is designed to permit maximum engine
speed in a no-load condition. Speeds that exceed this limit
may cause the blade to exceed the maximum safe allowable
speed.
■ Ensure that the blade is mounted for proper operating
direction.