Multiquip STH - Manual (Page 27)

STH-10 FT. • RIDE-ON POWER TROWEL — PARTS & OPERATION MANUAL — REV. #5 (06/08/05) — PAGE 27
RIGHT PIVOT ASSY.
NO PART NO PART NAME QTY REMARKS
1 0166 A WASHER, LOCK, 3/8 MED 4
2 0205 SCREW, HHC 3/8-16 X 1 10
3 10133 NUT, NYLOC 3/8-16 8
4 10138 SCREW, SHS 1/4-20 X 1/2, N.P. 1
5 10176 NUT, NYLOC 1/2-13 4
6 10221 BUSHING, 1ID X 1.1/8 OD X 1 LG 2
7 1023 SCREW, HHC 3/8-16 X 1 1/4 6
8 11154 RETAINER, CENTRIFUGAL CLUTCH 1
9 11420 SHAFT, PIVOT 1
10 11772 SHIM, TRUNNION .063 THICK 1
11 11773 SHIM, TRUNNION .031 THICK 1
12 11882 SCREW, FHSC 1/2-13 X 2 1/4 2
13 12086 TRUNNION W/A 1
14 12112 MOTOR, HYD STH 112-11209 1
16 12292 MOUNT, HYD MOTOR RIGHT W/A 1
17 12295 PLATE, HYD MOTOR MOUNT END 1
18 12304 ROCKER BLOCK 2
19 12591 SCREW, FLUSH HEAD 1/2-13 X3 2 STH UNITS S/N IK60764 AND LATER. ALSO SEE NOTE
20 12480 PLATE, MOTOR STEERING MOUNT 2
NOTE:
IF WEAR CAP 12406 IS INSTALLED (STH's WITH S/N IK60763 AND BELOW) USE P/N 12318 (SCREW, HEX HEAD 1/2-13 X 2 3/4).
STH-55JD-TC — PIVOT ASSY. (RIGHT)