Multiquip JWN - Manual (Page 18)

PAGE 18 — HTN 31V
JWN-SERIES • RIDE-ON POWER TROWEL — PARTS AND OPERATION MANUAL — REV. #8 (12/18/07) — PAGE 18
JWN-SERIES — CONTROLS AND INDICATORS
17. Safety "kill switch" – Shuts down engine when seat is
empty.
18. Rear Light – The JWN-Series Ride-On Power Trowel has
three 12 volt halogen lights.
19. Lift Loops – Located on both sides of the main frame.
Used to lift the trowel.
20. Engine Air Filter – Protects the engine from dirt.
21. Oil Filter – Filters the engine oil.
22. Oil Drain - Remove the plug to drain the engine oil.
23. Retardant Spray Tank – Holds 5 gallons of retardant.
24. Retardant Spray Pump – Delivers retardant to the spray
nozzle.
25. EZ- Mover Boss – Rear attachment point for EZ Mover.
Used to transport the trowel.
26. Spiders (Left/Right) – Consists of trowel arms, blades,
wear plate, and thrust collar.
27. Document Box- Contains all product documentation.
28. Battery – Provides +12V DC power to the electrical
system.
29. Belt Guard – Encloses drive belt used in conjunction with
clutch.
30. Engine Oil Fill - Remove this cap to add engine oil.
Figure 3. JWN-SERIES Controls and Indicators (Rear)
Read this entire instruction manual completely before
attempting to operate the trowel.
RETARDANT ONLY RETARDANT ONLY
17
18
20
21
22
23
24
26 25 26
27
28
29
30
19
19
25
NOTE